Print and laminating

Short description

  • Single-sided and double-sided treatment station for printing and lamination
  • Refreshment of material treated at the extruder
  • In conjunction with a nip roller, it can also be used as a web tension station

Products

  • AVE-120D
  • AVE-150CA
  • AVB-150C
  • AVE-200E
  • AVB-200E
  • AVE-250E

Metal and ceramic electrodes (Order specific)

Ceramic electrodes also suitable for boost treatment of conductive materials

Very low risk of ceramic electrode breakage

Patented flexible holders allow the ceramic electrodes to pivot in the running direction and radially.

Compact construction

The design can usually be installed even in tight spaces

Electrode housing with metal enclosure

Lowest possible EMC levels, no fire-hazard, large high-voltage clearances ensure that no flashovers or creepage discharges can occur through moisture or contamination when compared with electrodes using plastic shielding, long lifetime.

High-voltage transformer, mounted directly onto the electrode housing, no external high-voltage wiring

Avoids electric shocks, fires and interference radiation

Treatment and nip rolls (Order-specific)

Avoid slippage and reverse-side treatment

Silicone, ceramic or stainless steel coating according to application

Spray gap can be set from the outside

Ceramic high-voltage Insulators

No danger of creepage discharges or incineration, unlike Teflon or other plastic material insulators. High degree of inherent safety.