Cast film extrusion

Short description

  • Treatment of materials during the extrusion process
  • Mounting between edge trimming and winder

Products

  • AVE-250FT
  • AVB-250FT
  • AVB-300FT
  • AVE-300FT
  • AVE-400FT


Stainless-steel and metal electrodes (Standard)

High performance, minimum wear

Cartridge system with integrated ozone extraction with either 5 or 8 electrodes

Low thermal impact of the foil, efficient ozone extraction, easy maintainance

Electrode system radially pivoting in running direction

This prevents the electrode system being damaged at incorrect edge trimming or foil thickening

Electrode housing with metal enclosure

Lowest possible EMC levels, no fire-hazard, large high-voltage clearances ensure that no flashovers or creepage discharges can occur through moisture or contamination when compared with electrodes using plastic shielding, long lifetime.

No potential danger of electric shocks, fires and interference radiation

Treatment and nip rolls (Order-specific)

Avoid slippage and reverse-side treatment

Silicone or ceramic dielectric

Spray gap can be set from the outside

Ceramic high-voltage Insulators

No danger of creepage discharges or incineration, unlike Teflon or other plastic material insulators. High degree of inherent safety.